HARDOX Wear Plate
We offer custom size plate burning and parts burning.
Our tables can handle parts up to 10′ wide and 55′ in length.
Each burning machine is equipped with both Oxy/Fuel
and Plasma Capability.
We offer custom size plate burning and parts burning.
Our tables can handle parts up to 10′ wide and 55′ in length.
Each burning machine is equipped with both Oxy/Fuel
and Plasma Capability.
Hardox 450
|
Hardox 500
|
||
Hardness, HB
|
425-475
|
470-530
|
|
Yield Strength, ksi
|
175,000
|
190,000
|
|
Tensile Strength, ksi
|
205,000
|
225,000
|
|
Impact Properties @ -40° F, min
|
30 ft. lbs.
|
22 ft. lbs.
|
|
Standard Plate Size 96″ x 288″
|
|||
3/16″
|
|||
1/4″, 5/16″, 3/8″, 1/2″,
3/4″ , 5/8″, 1″, 1-1/4 |
|||
= Normally in Stock
Your
Source For High Strength Weathering,
High Strength and Abrasion Resistant Steel
High Strength and Abrasion Resistant Steel
HARDOX SPECIFICATIONS
Hardox 450
All-round abrasion resistant plate that combines
hardness, strength and toughness for maximum payload and longer service life.
|
Hardox 500
A bendable and weldable abrasion resistant plate
which is used in applications that demand higher wear resistance.
|
Hardox 550
Has a hardness of 550 Brinell and toughness equal to
HARDOX 500. Designed to increase wear life but not at the expense of crack
integrity
|
|
Hardness:
|
425-475HBW
|
470-530 HBW up to 32mm
450-540 HBW 32-80mm
|
525-575HBW
|
Yield strength:
|
1200MPa
|
1300MPa
|
1400MPa
|
Tensile strength:
|
1400MPa
|
1550MPa
|
1700MPa
|
Hardening process:
|
Quench & tempered
|
Quench & tempered
|
Quench & tempered
|
Finish:
|
≥3.2mm primed surface
|
Primed surface
|
Primed surface
|
Real Steel available thickness
range:
|
2mm- 75mm
|
8mm- 50mm
|
25mm- 50mm
|
Standard plate length (width of all plates excluding
2mm HX450= 2500mm):
|
2mm = 1500 x 5850mm
3.2mm = 8500 4mm = 8000 and 9600 5mm = 8000 and 9600 ≥6mm = 8000 |
All thicknesses = 8000
|
All thicknesses = 8000
|
Hardox
We are a major UK supplier of Hardox. It is a high-strength, SSAB abrasive
plate. MTL is one of the largest suppliers of components manufactured from
wear resistant steels. Our skilled work force has many years’ experience of
working with this type of material.
Hx is the world’s most widely used wear resistant steel plate and it can be
used as an alternative to CCO plate. We supply various wear parts from Hammer
Blades and Liner Plates to fully fabricated Tipper Bodies. Its wear plate
increases wear life and is typically used in many of our core sectors,
including quarrying, construction and recycling. In products such as shredder
blades, Hardox is proven to last twice as long as conventional steel, saving
time, improving efficiency and fundamentally reducing down-time.
Due to our extensive manufacturing capabilities we can machine up to 700HB,
press parts up to 7.2m in length and waterjet cut Hardox to avoid a HAZ (Heat
Affected Zone).
The hardness of Hx means that a structure is kept in shape without becoming
plastically deformed. Its toughness allows the material to cope with jolts,
shocks and bangs without damage, and it is resistant to cracks during
manufacturing processes such as pressing.
The high yield strength of the material allows for stronger designs at a
lighter weight, whilst still remaining one of the most wear resistant steels.
We are proud to be the largest Hardox Wearparts Centre in the UK. We can
offer customers a fast turnaround due to our extensive stock on site in all
grades and thicknesses. We can offer expert advice with an on-site visit to
discuss your wearplate requirements and help in the design optimisation stage
of the project.
We can supply:
Hardox 400, Hardox 450, Hardox 500, Hardox 550, Hardox 600, Hardox HiTuf,
Hardox Extreme.